How to Use bevel in a Sentence

bevel

1 of 2 noun

• Note that the bevel on the tooth is facing the back of the saw.
  — Roy Berendsohn, Popular Mechanics, 8 Nov. 2018
• Because of the shape of the seat, most of the slats require bevels on one or both edges.
  — Neal Barrett, Popular Mechanics, 21 Mar. 2017
• Due to its very fine-grain and 16° bevel, it can be honed to a razor-sharp edge.
  — Cosmo Genova, Field & Stream, 3 May 2023
• The sharpening wheel is what is refining the bevel on the edge of the knife blade.
  — Meg Carney, Field & Stream, 21 Sep. 2023
• Locate the bevel — the angle at which the inner surface of the tool meets the back surface along the edge.
  — Beth Botts, Chicago Tribune, 18 Mar. 2023
• The blade should be ground into a flat bevel that is easy to sharpen and maintain in the field.
  — Matthew Every, Field & Stream, 20 Dec. 2019
• Also, sand a bevel into the rounded ends of the log, just to remove the sharp, square edge.
  — Joseph Truini, Popular Mechanics, 26 Dec. 2020
• As on a shovel, keep the surface of the file at the same angle as the existing bevel.
  — Beth Botts, Chicago Tribune, 18 Mar. 2023
• This is a two-piece holder with a slide-in bevel closure.
  — Chris Hachey, BGR, 21 May 2021
• With a beveled mirror like yours, the groove might even have an angle that matches the bevel.
  — Jeanne Huber, Washington Post, 11 Nov. 2019
• Sharpen only the beveled side of the blade, working in the same direction as the bevel.
  — Cindy Daniel, Sunset, 22 Jan. 2018
• Start outside the line and work back to the knife line,making sure that the chisel’s bevel faces the waste that’s being cut away.
  — Bradley Ford, Popular Mechanics, 25 Feb. 2020
• Now match the second set of cuts: Start at the bottom sides and cut down—at an angle again rather than straight down—to make bevels.
  — Hugh Garvey, Sunset Magazine, 7 Sep. 2023
• Turn the saw around in the vise and file the cutters with their bevel facing the opposite direction.
  — Joe Truini, Popular Mechanics, 10 July 2023
• Cardinal scored the log in intervals to break up the grain, then used a broad ax — which has a bevel on just one side of the blade — to take off chunks.
  — Doug Ross, Chicago Tribune, 21 Aug. 2023
• The links are brushed on top but have polished bevels, a trick that adds dimension and sparkle to watch bracelets and is being used by a lot of brands right now.
  — Carol Besler, Robb Report, 12 May 2023
• Next, cut each shelf part to its finished length by cutting a 45-degree bevel on each end.
  — Joseph Truini, Popular Mechanics, 24 Jan. 2019
• Rip a 20-degree bevel into a 24-inch piece of scrap, and apply masking tape to the angled side.
  — Ted Kilcommons, Popular Mechanics, 18 July 2020
• Excess force will cause the chisel to overcut as its bevel is driven into the wood.
  — Bradley Ford, Popular Mechanics, 25 Feb. 2020
• But the strangest sacrifice of all is Toyota's use of a hypoid-bevel-gear final-drive in the Tercel.
  — Don Sherman, Car and Driver, 22 Feb. 2023
• Picture windows with square and diamond bevels take in leafy views.
  — Neal J. Leitereg, latimes.com, 21 Apr. 2018
• Would the bevel on its base sit correctly on a coffee table?
  — Stellene Volandes, Town & Country, 12 Sep. 2017
• The teeth of this high-quality 40-tooth blade have both flat-top and alternate-top-bevel grind so the blade rips and crosscuts cleanly.
  — Roy Berendsohn, Popular Mechanics, 15 Jan. 2019
• These saws are quick and accurate, and thanks to a pivoting and tilting blade, most can make angled miter and bevel cuts as well.
  — Alex Rennie, Popular Mechanics, 27 July 2023
• The new renders show a thicker bevel in the plastic frame, presumably indicating the frame will stick out from the surface of the phone more.
  — Ron Amadeo, Ars Technica, 25 July 2019
• Ephron Harari has a particular passion for the name bevel.
  — Jeryl Brunner, Forbes, 26 Jan. 2023
• The type of and hardness of the steel, whether it is coated or not, the angle of the bevel, and many other factors contribute to a knife’s ability to take and hold an edge.
  — Cosmo Genova, Field & Stream, 3 May 2023
• Made from high-carbon stainless steel, each blade features a 20-degree bevel angle that makes meal prep a piece of cake.
  — Audrey Bruno, SELF, 27 Jan. 2023
• It's built to bring forth quick, accurate bevel cuts between 0 and 48 degrees.
  — David Grossman, Popular Mechanics, 21 Feb. 2018
• This drives a bevel box to turn a belt connected to the single rear wheel, the layout meaning there is no need for a differential.
  — Mike Duff, Car and Driver, 24 Feb. 2022

Advertisement

bevel

2 of 2 verb

• Next, crosscut and bevel the seat support and lay the support across the legs.
  — Joesph Truini, Popular Mechanics, 12 June 2017
• Next, crosscut and bevel the seat support and lay the support across the legs.
  — Joseph Truini, Popular Mechanics, 25 Apr. 2020
• This rubber pick is 0.75 inches thick and features beveled edges to keep the mat in place.
  — Addie Morton, Better Homes & Gardens, 21 Mar. 2023
• Adjust the table saw blade angle to 9 1⁄2-degrees and bevel one edge of the front and back slats.
  — Neal Barrett, Popular Mechanics, 31 July 2021
• Next, use a permanent marker to draw a black line along the blade’s beveled cutting edge.
  — Joseph Truini, Popular Mechanics, 21 Jan. 2020
• The mat has a non-slip design at the bottom, a smooth surface to stand on, and beveled edges that help prevent slipping and tripping.
  — Toni Sutton, Peoplemag, 28 Feb. 2023
• For the flipped effect, follow up a round-brush blowout by smoothing strands with a flat iron, slightly beveling the ends, says Atkin.
  — Lauren Valenti, Vogue, 19 July 2017
• Either way, this beveled light mirror is a good option for those yearning for a bit of glamour.
  — Isiah Magsino, Town & Country, 24 Mar. 2023
• The superstructure calls for a white concrete finish, and its underside is shaped or beveled for a lighter look.
  — Andres Viglucci, miamiherald, 25 May 2017
• Before assembling the planter, use a block plane to slightly bevel the edge of the narrower tapered piece of each panel.
  — Thomas Klenck, Popular Mechanics, 20 June 2020
• What's so beautiful is the way every piece is beveled, tapered — almost like jewels.
  — Frances Schultz, House Beautiful, 8 Nov. 2012
• Yilan Hua's shoulder-grazing lengths were styled into a swoopy flip, hairstylist Damien Boissinot beveling the ends with a round brush and blow dryer.
  — Lauren Valenti, Vogue, 29 Feb. 2020
• The knives are labeled as being beveled to 15 degrees, which is characteristic of Japanese-style knives.
  — Cai Cramer, Peoplemag, 20 Apr. 2023
• Another way to update classics: Here, Shaker-style cabinets, shiplap on walls and interior doors have been beveled to reduce the thickness of the edges.
  — Janet Eastman, OregonLive.com, 1 Aug. 2017
• Right-angle grinder: for grinding, beveling, and flattening welds, as well as for surface preparation.
  — Phillip Pantuso, Popular Mechanics, 27 May 2015
• Some stations’ wooden window frames are beveled, some roofs have finials, and some rounded arches are replaced with ever-so-slightly pointed arches.
  — Peter Christensen, Smithsonian, 24 Apr. 2018
• To use them effectively, fabricators typically bevel and deburr the ends after they are cut to length.
  — Roy Berendsohn, Popular Mechanics, 20 Oct. 2017
• Next, crosscut and bevel the seat support and lay the support across the legs.
  — Joesph Truini, Popular Mechanics, 12 June 2017
• Next, crosscut and bevel the seat support and lay the support across the legs.
  — Joseph Truini, Popular Mechanics, 25 Apr. 2020
• This rubber pick is 0.75 inches thick and features beveled edges to keep the mat in place.
  — Addie Morton, Better Homes & Gardens, 21 Mar. 2023
• Adjust the table saw blade angle to 9 1⁄2-degrees and bevel one edge of the front and back slats.
  — Neal Barrett, Popular Mechanics, 31 July 2021
• Next, use a permanent marker to draw a black line along the blade’s beveled cutting edge.
  — Joseph Truini, Popular Mechanics, 21 Jan. 2020
• The mat has a non-slip design at the bottom, a smooth surface to stand on, and beveled edges that help prevent slipping and tripping.
  — Toni Sutton, Peoplemag, 28 Feb. 2023
• For the flipped effect, follow up a round-brush blowout by smoothing strands with a flat iron, slightly beveling the ends, says Atkin.
  — Lauren Valenti, Vogue, 19 July 2017
• Either way, this beveled light mirror is a good option for those yearning for a bit of glamour.
  — Isiah Magsino, Town & Country, 24 Mar. 2023
• The superstructure calls for a white concrete finish, and its underside is shaped or beveled for a lighter look.
  — Andres Viglucci, miamiherald, 25 May 2017
• Before assembling the planter, use a block plane to slightly bevel the edge of the narrower tapered piece of each panel.
  — Thomas Klenck, Popular Mechanics, 20 June 2020
• What's so beautiful is the way every piece is beveled, tapered — almost like jewels.
  — Frances Schultz, House Beautiful, 8 Nov. 2012
• Yilan Hua's shoulder-grazing lengths were styled into a swoopy flip, hairstylist Damien Boissinot beveling the ends with a round brush and blow dryer.
  — Lauren Valenti, Vogue, 29 Feb. 2020
• The knives are labeled as being beveled to 15 degrees, which is characteristic of Japanese-style knives.
  — Cai Cramer, Peoplemag, 20 Apr. 2023

Last Updated: 5 Sep 2024